Machine Information
U800 | 5-Axis Machining Center
You can also contact TAKUMI by calling 1-844-302-3792 or email info@takumiusa.com
- Machine Overview
- Technical Specifications
High-Speed Machining and Outstanding
Surface Finish: Great for Aerospace
- 31.49 x 45.28 x 29.52 in (799 x 1,150 x 749 mm) travels
- 31.49 in diameter (799 mm diameter) table working surface
with 2,205 lbs (1,000 kg) maximum capacity - 1,890 inches per minute (48 m/minute) rapids
- 945 in/minute (24 m/minute) cutting feed rates
- One-piece casting absorbs the thrust forces of high rapids and
fast cutting feeds - Gantry design with U-shaped integral structure of the base and
columns promote rigidity and stability - Ladder design of cross rails increases rigidity and eliminates
head deflection - Over 35 components are hand scraped for fit
- Roller type linear rails support faster feed rates, higher rigidity,
and smoother linear motion due to larger contact area
compared to ball-type linear rails - Twin synchronized Y-axis motors increase speed and
acceleration capability - Trunnion table with integral torque motors (instead of gear
drives) provides quicker response, higher torque, better
positioning accuracy and lower maintenance requirements - High performance 20,000 rpm motorized spindle to satisfy a
multitude of machining requirements - 32-station carousel ATC
- HSK63A tooling
- Heidenhain TNC 640 Control
- 2 year machine parts warranty
- 1 year control parts and labor warranty
- Factory direct service and 24/7 tech support
SPECIFICATIONS | U800 | |
TRAVEL | X-Axis | 31.49 in / 799 mm |
Y-Axis | 45.28 in / 1,150 mm | |
Z-Axis | 29.52 in / 749 mm | |
Distance from Spindle Nose to Table | 4.92 ~ 34.45 in / 125 ~ 875 mm |
|
TABLE | Dimensions | 31.49 in diameter / 800 mm diameter |
Max. Load | 2,205 lbs / 1,000 kg | |
T-slot (number x width x pitch) | .55 x 3.94 x .28 in /
14 x 100 x 7 mm |
|
SPINDLE | Type | Motorized |
Spindle Speed | 20,000 rpm | |
Spindle Torque Peak | 99.5 ft lb / 135 Nm | |
Motor Power (cont./30 min) | 33.53/53.64 HP / 25/40 kW | |
Coolant Thru Spindle | 30 bar / 435 psi | |
Spindle Taper | HSK-63A | |
FEED RATE | Rapid Traverse (X/Y/Z) | 1,890 x 1,890 x 1,890 ipm / 48 x 48 x 48 m/min |
Cutting Feed Rate | 945 ipm / 24 m/min |
|
ATC & MAGAZINE | ATC Type | Carousel |
Magazine Capacity | 32 tools | |
Maximum Tool Diameter (next pocket empty) | 3.54/4.92 in / 90/125 mm | |
Maximum Tool Length | 11.81 in / 300 mm | |
Maximum Tool Weight | 15.43 lbs / 7 kg | |
Tool Shank | HSK-63A | |
SPACE & SYSTEM REQUIREMENTS |
Pneumatic Pressure | 85.34 psi / 6 kgf/cm² |
Electrical Power Consumption | 80 KVA | |
Machine Net Weight | 39,683.21 lbs / 18,000 kg | |
Operating Dimensions (W x L x H) | 165.35 x 120.28 x 162.20 in / 4,200 x 3,055 x 4,120 mm |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.