Machine Information
VC1052 | Vertical Machining Center
VC Series vertical machining centers are fast, three-axis linear guide machining centers designed for customers doing batch or production work.
You can also contact TAKUMI by calling 1-844-302-3792 or email info@takumiusa.com
- Machine Overview
- Features & Options
- Technical Specifications
- Spindle Information
VC SERIES
VC Series vertical machining centers are fast, three-axis linear guide machining centers designed for customers doing batch or production work
Fast Rapids + High Precision
• Rapids of 1,417 inches per minute
• Perfect combination of fast cutting and high stability
• Designed and built for mold machining
• Pre-tensioned ballscrews minimize thermal growth and improve accuracy
• Ergonomic table simplifies setup
• Swiveling control panel optimizes floor space utilization
• Robust, precision-machined castings
• Hand-scraped contact areas
• 24-tool, CAT 40, swing-arm ATC standard
• Integrated washdown and chip management system
• Spindle chiller maximizes heat dissipation
• Direct-coupled ballscrews increase accuracy
• Absolute encoder ensures fast start-up
• FANUC© 0i-MF Series Control
• Fast, trained, factory service and support
Optional Accessories
- 1 Gigabyte Data Server
- 4th axis rotary table
- BT 40 tool holder conversion
- Collant filtration
- Coolant through spindle (CTS)
- Lift up chip conveyor with cart
- Memory card editing
- Oil mist collector
- Oil mist device
- Oil skimmer
- Part probe measurement system
- Tool probe measurement system
Standard Accessories
- 100 gallon coolant tank
- 3-light indicator lamp
- 4th axis interface cables and connectors
- Centralized automatic lubrication system
- Electrical cabinet heat exchanger
- Ethernet and RS-232C interface
- Full enclosure
- Leveling bolts and pads
- Manual pulse generator (MPG)
- Operation-safety door switches
- Operator manuals
- Programmable chip auger with lift-up exhaust tube and chip cart
- Programmable coolant wash down
- Programmable cutting air blow
- Spindle chiller
- Toolbox
- Wash down gun and air gun
- Work light
SPECIFICATIONS | VC1052 | |
TRAVEL | X-Axis | 41.73 in / 1,060 mm |
Y-Axis | 20.47 in / 520 mm | |
Z-Axis | 24.02 in / 610 mm | |
Distance from Spindle Nose to Table | 4.53 ~ 28.54 in / 115 ~ 725 mm | |
Distance from Spindle Nose to Z-Axis Guide Ways | 22.64 in / 575 mm | |
TABLE | Dimensions | 45.67 x 20.47 in / 1,160 x 520 mm |
Max. Load | 1,433 lbs / 650 kg | |
T-slot (number x width x pitch) | 5 x .71” on 3.94” Centers/
5 x 18mm on 100mm Centers |
|
SPINDLE | Type | Belt |
Spindle Speed | 12,000 rpm | |
Motor Power (cont./30 min) | 10.1/14.8 HP / 7.5/11 kW | |
Spindle Taper | CAT 40/BT 40 | |
FEED RATE | Rapid Traverse (X/Y/Z) | 1,417 x 1,417 x 944 ipm / 36 x 36 x 24 m/min |
Cutting Feed Rate | 0.04 ~ 472.44 ipm / 1 ~ 12,000 mm/min |
|
Power (X/Y/Z) | 2.4/4.0/3.3 hp / 1.8/3.0/2.5 kW | |
ATC & MAGAZINE | ATC Type | Swing-Arm |
Magazine Capacity | 24 tools | |
Maximum Tool Diameter (next pocket empty) |
3.15/5.91 in / 80/150 mm | |
Maximum Tool Length | 11.8 in / 300 mm | |
Maximum Tool Weight | 15.4 lbs / 7 kg | |
Tool Shank | CAT40 (BT 40 optional) | |
SPACE & SYSTEM REQUIREMENTS |
Pneumatic Pressure | 5 CFM @ 85-115 psi / 0.14m3 /min. @ 6-8 bar |
Electrical Power Consumption | 30 KVA | |
Machine Net Weight | 13,007 lbs / 5,900 kg | |
Machine Dimension | 116.42 x 84.72 x 112.01 in / 2,957 x 2,152 x 3,099 mm |
|
Operating Dimensions (W x L x H) | 195.15 x 147.36 x 122.01 in / 4,957 x 3,743 x 3,099 mm |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
High Accuracy + High Performance Spindle | BIG-PLUS® Spindles
Belt-type and gear-type spindles, based on machining requirements
- 12,000 RPM Belt-type spindles
Spindle Power & Torque Charts |
![]() |
Belt Spindle Picture |
![]() |