Machine Information
V10 | Vertical Machining Center
You can also contact TAKUMI by calling 1-844-302-3792 or email info@takumiusa.com
- Machine Overview
- Features & Options
- Technical Specifications
- Spindle Information
V SERIES
V Series vertical machining centers are heavy duty, box way machines built for tough applications such as roughing cast iron. These three-axis massive machines feature belt or geared spindles to provide maximum torque
High-Rigidity + High-Precision Structure
- Perfect combination of heavy cutting and high stability
- Designed and built for heavy material removal parts production and mold
& die industries - Large box ways for rigid and heavy cutting
- Pre-tensioned ballscrews minimize thermal growth and improve accuracy
- Direct-coupled motors increase accuracy
- Swiveling control panel optimizes floor space utilization
- Spindle chiller maximizes heat dissipation
- Extra-wide door openings facilitate loading and unloading
- Hand-scraped contact areas
- Robust, precision-machined castings
- Hand-scraped contact areas
- Box-shape bed made of one piece casting
- Integrated washdown and chip management system
- Absolute encoders ensure fast start-up
- FANUC© 0i-MF Series Control
- Fast, trained, factory service and support
Optional Accessories
- 4th axis rotary table
- Air Conditioner
- BT 40 tool holder conversion
- CAT3 Compliance Package
- Coolant through spindle (CTS)
- Oil mist collector
- Oil mist device
- Oil skimmer
- Part probe measurement system
- Tool probe measurement system
Standard Accessories
- 24-tool, CAT, swing-arm ATC
- 3-light indicator lamp
- Centralized automatic lubrication system
- Chip conveyor and cart
- Coolant washdown system
- Ethernet and RS-232C interface
- Full enclosure
- Heat exchanger
- Leveling bolts and pads
- Manual pulse generator (MPG)
- Operator manuals
- Programmable Airblow Machining
- Spindle chiller
- Toolbox
- Wash down gun and air gun
- Work light
SPECIFICATIONS | V10 | |
TRAVEL | X-Axis | 39.5 in / 1,000 mm |
Y-Axis | 26 in / 660 mm | |
Z-Axis | 24 in / 610 mm | |
Distance from Spindle Nose to Table | 5.91 ~ 29.92 in / 150 ~ 760 mm | |
Distance from Spindle Nose to Z-Axis Guide Ways | 27.56 in / 700 mm | |
TABLE | Dimensions | 41.73 x 25.59 in / 1,060 x 650 mm |
Max. Load | 2,204.62 lbs / 1,000 kg | |
T-slot (number x width x pitch) | 5 x .71” on 3.94” Centers/
5 x 18mm on 100mm Centers |
|
SPINDLE | Type | Belt |
Spindle Speed | 12,000 rpm | |
Spindle Torque Peaks | 70.8ft/lb / 96.01 nm | |
Motor Power (cont./30 min) | 10/14.8 HP / 7.5/11 kW | |
Coolant Thru Spindle | 30 bar / 435 psi | |
Spindle Taper | CAT/BT 40 | |
FEED RATE | Rapid Traverse (X/Y/Z) | 945 x 945 x 787 ipm / 24 x 24 x 20 m/min |
Cutting Feed Rate | 315 ipm / 8 m/min | |
Power (X/Y/Z) | 4.0/4.0/4.0 hp / 3.0/3.0/3.0 kW | |
ATC & MAGAZINE | ATC Type | Swing-Arm |
Magazine Capacity | 24 tools | |
Maximum Tool Diameter (next pocket empty) | 3.15/5.91 in / 80/150 mm | |
Maximum Tool Length | 11.8 in / 300 mm | |
Maximum Tool Weight | 15.4 lbs / 7 kg | |
Tool Shank | CAT 40 (BT 40 optional) | |
SPACE & SYSTEM REQUIREMENTS |
Pneumatic Pressure | 5 CFM @ 85-115 psi / 0.14m3 /min. @ 6-8 bar |
Electrical Power Consumption | 35 KVA | |
Machine Net Weight | 14,770 lbs / 6,700 kg | |
Operating Dimensions (W x L x H) | 248.03 x 165.35 x 124.02 in / 6,300 x 4,200 x 3,150 mm |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
High Accuracy High Performance Spindle
- Belt-type and gear-type spindles, based on machining requirements
- Spindles manufactured by Takumi
Spindle Power & Torque Chart |
![]() |
Belt Type Spindle |
![]() |