Machine Information
U600 | 5-Axis Machining Center
You can also contact TAKUMI by calling 1-844-302-3792 or email info@takumiusa.com
- Machine Overview
- Features & Options
- Technical Specifications
High Speed Machining and Outstanding
Surface Finish
- 25.98 x 40.16 x 19.69 in (660 x 1,020 x 500 mm) travels
- 23.62 in diameter (600 mm diameter) table working surface
with 1,102 lbs (500 kg) maximum capacity - 1,417 inches per minute (36 m/minute) rapids
- 787 in/minute (20 m/minute) cutting feed rates
- 40-station swing arm ATC
- One-piece casting absorbs the thrust forces of high rapids and
fast cutting feeds - One piece double-column design increases rigidity enabling
higher cutting feeds while maintaining part finish - Ladder design of cross rails increases rigidity and eliminates
head deflection - Over 35 components are hand scraped for fit
- Roller type linear rails support faster feed rates, higher rigidity,
and smoother linear motion due to larger contact area
compared to ball-type linear rails - Large diameter, preloaded and pretensioned ballscrews with
fine pitch for accurate motion control - 15,000 rpm Big Plus® CAT 40 inline spindle
- Heidenhain TNC 640 Control
- 2 year machine parts warranty
- 1 year control parts and labor warranty
- Factory direct service and 24/7 tech support
Optional Accessories
- 435 psi (30 bar), 8 gpm collant-thru spindle
- 50 tool swing arm ATC
- Blum automatic tool length measurement system
- Collant filtration
- Heidenhain TS 460 automatic workpiece measurement system
- Heidenhain TS 740 automatic workpiece measurement system
- Linear scales X, Y and Z axes
- Oil mist collector
- Oil mist device
- Spindle thermal compensation system
Standard Accessories
- 15,000 rpm, 33.5 HP, Big Plus inline spindle
- 21 gigabyte SSDR for program storage
- 25 rpm 360° C-axis 800 mm table
- 3-light indicator lamp
- 33 rpm +30/-110° A-axis trunnion
- 40 tool swing arm ATC
- Coolant washdown system
- Hand-scraped contact areas
- Heidenhain TNC 640 control with 15.1” LCD display
- Leveling bolts and pads
- Oil skimmer
- Operator manuals
- Portable manual handwheel
- Programmable cutting air blow
- Roller-type linear guides on three axes
- Spindle chiller
- Steel belt, lift-up conveyor
- Wash down gun and air gun
- Work light
| SPECIFICATIONS | U600 | |
| TRAVEL | X-Axis | 25.98 in / 660 mm |
| Y-Axis | 40.16 in / 1,020 mm | |
| Z-Axis | 19.69 in / 500 mm | |
| Distance from Spindle Nose to Table | 6.30 ~ 25.98 in / 160 ~ 660 mm |
|
| TABLE | Dimensions | 23.62 in diameter / 600 mm diameter |
| Max. Load | 1,102 lbs / 500 kg | |
| T-slot (number x width x pitch) | .55 x 3.94 x .20 in /
14 x 100 x 5 mm |
|
| SPINDLE | Type | Inline |
| Spindle Speed | 15,000 rpm | |
| Spindle Torque Peak | 65.9 ft lb / 89.4 Nm | |
| Motor Power (cont./30 min) | 13.41/18.77 HP / 10/14 kW | |
| Coolant Thru Spindle | 30 bar / 435 psi | |
| Spindle Taper | Big Plus® CAT 40 | |
| FEED RATE | Rapid Traverse (X/Y/Z) | 1,417 x 1,417 x 1,417 ipm / 36 x 36 x 36 m/min |
| Cutting Feed Rate | 787 ipm / 20 m/min |
|
| ATC & MAGAZINE | ATC Type | Swing Arm |
| Magazine Capacity | 40 tools | |
| Maximum Tool Diameter (next pocket empty) | 2.95/5.91 in / 75/150 mm | |
| Maximum Tool Length | 11.81 in / 300 mm | |
| Maximum Tool Weight | 17.64 lbs / 8 kg | |
| Tool Shank | CAT 40 (BT 40 Optional) | |
| SPACE & SYSTEM REQUIREMENTS |
Pneumatic Pressure | 85.34 psi / 6 kgf/cm² |
| Electrical Power Consumption | 60 KVA | |
| Machine Net Weight | 30,864.72 lbs / 14,000 kg | |
| Operating Dimensions (W x L x H) | 128.15 x 151.77 x 138.58 in / 3,255 x 3,855 x 3,520 mm | |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
Related Machines
- 5-Axis
- 31.49 x 45.28 x 29.52 in (799 x 1,150 x 749 mm)
- 32 tools
