Machine Information
SL200 | Lathe
HEAVY AND INTERRUPTED CUTTING WITH SUPERIOR PART FINISHES
You can also contact TAKUMI by calling 1-844-302-3792 or email info@takumiusa.com
- Machine Overview
- Technical Specifications
- True 45-degree slant bed
- Hardened and ground box ways on all axes
- 10.83" (275 mm) distance between X-axis ways
- 9.76" (248 mm) distance between Z-axis ways
- Brushless Fanuc AC servos
- Doublenut pre-loaded pretensioned X/Z axis ballscrews are 1.57" (40 mm) with 10 mm pitch
- Fanuc AC spindle motor and drive
- Heavy duty belt driven spindle
- Maintenance-free cartridge spindle with permanently greased bearings
- Bi-directional hydraulic turret
- Hydraulic tailstock mounted on box ways
- Tailstock quill diameter 3.14" (80 mm)
- Tailstock quill travel 3.14" (80 mm)
- Tailstock travel (manual position) 24" (610 mm)
- Quill taper Morse Taper #4
SPECIFICATIONS | SL200 |
Chuck Size | 8” / 200 mm |
Spindle Nose | A2-6 |
Bore/Draw Tube ID | 3.11” / 2.55” (79 mm / 65 mm) |
X/Z Travels | 7.48” x 27.55” / 190 x 700 mm |
Swing over Bed | 16.93” / 430 mm |
Max. Turning Diameter | 12.6” / 320 mm |
Max. Turning Length | 25.59” / 650 mm |
Spindle RPM | 4,000 rpm |
Spindle Acc. Full RPM | 3.6 sec |
Spindle Acc. / Dec. | 2.3 sec |
HP (15 min / 60 min / cont.) | 25/20/15 HP (18.5/14.7/11 kw) |
Torque (15 min / 60 min / cont.) | 98/72/54 ft lbs (133/98/73.5 Nm) |
Rapid Traverse (X/Z) | 787 ipm / 20 m/m |
Turret Stations | 10 tools |
Tooling Size | 25 x 25 mm |
Max. Boring Bar | 1.25” / 32 mm |
Tool Change (Adj. / Furthest) | .5/2 sec |
Positioning (VDI 3441) | +/- .0002” (+/- .005 mm) |
Repeatability (VDI 3441) | +/- .00012” (+/- .003 mm) |
Weight | 11,902 lbs / 5,400 kg |
Control | Fanuc® Oi-TF |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.