
VC1052
Machine Information
Product Overview
3-Axis Vertical Machining Center
VC SERIES CNC Mill
High Efficiency Die/Mold Machining Center
Direct-Drive Spindle Technology
- Rapids of 1,417 inches per minute
- Perfect combination of fast cutting and high stability
- Designed and built for mold machining
- Pre-tensioned ballscrews minimize thermal growth and improve accuracy
- Ergonomic table simplifies setup
- Swiveling control panel optimizes floor space utilization
- Robust, precision-machined castings
- Hand-scraped contact areas
- 24-tool, CAT 40, swing-arm ATC standard
- Integrated washdown and chip management system
- Spindle chiller maximizes heat dissipation
- Direct-coupled ballscrews increase accuracy
- Absolute encoder ensures fast start-up
- FANUC© 0i-MF Series Control
- Fast, trained, factory service and support
360 Walkaround
Take a virtual tour to have a better look inside and around the machine.
Technical Specifications
Weight | 13007 lbs |
---|---|
Dimensions | 84.72 × 116.42 × 112.01 in |
Travel |
|
X-Axis | 41.73 in (1060 mm) |
Y-Axis | 20.47 in (520 mm) |
Z-Axis | 24.02 in (610 mm) |
Table |
|
Distance from Spindle Nose to Table | 4.53 ~ 28.54 in (115 ~ 725 mm) |
Table Size | 45.67 x 20.47 in (1160 x 520 mm) |
Table Max. Load | 1433 lbs (650 kg) |
T-Slot Size | 5 x .71” on 3.94” Centers (5 x 18mm on 100mm Centers) |
Spindle |
|
Spindle Speed | 12000 rpm |
Motor Power | Cont./30 min: 10.1/14.8 HP ( 7.5/11 kW) |
Spindle Taper | CAT 40/BT 40 |
Feed Rate |
|
Rapid Traverse (X/Y/Z) | 1417 x 1417 x 994 ipm (36 x 36 x 24 m/min) |
Cutting Feed Rate | 0.04 ~ 472.44 ipm (1 ~ 12, 000 mm/min) |
ATC |
|
ATC Type | Swing Arm |
Magazine Capacity | 24 Tools |
Max. Tool Diameter | 3.15 / 5.91 in (80 / 150 mm) |
Max. Tool Length | 11.81 in (300 mm) |
Max. Tool Weight | 15.4 lbs (7 kg) |
Tool Shank | CAT 40 (BT 40 Optional) |
Space & System Requirements |
|
Machine Net Weight | 13007 lbs (5900 kg) |
Electrical Power Consumption | 30 KVA |
Pneumatic Pressure | 5 CFM @ 85-115 psi (0.14m3 /min) @ 6-8 bar |
Operating Dimensions | 195.15 x 147.36 x 122.01 in (4957 x 3743 x 3099 mm) |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
Standard Features & Options
Standard Features
- 100 gallon coolant tank
- 3-light indicator lamp
- 4th axis interface cables and connectors
- Centralized automatic lubrication system
- Electrical cabinet heat exchanger
- Ethernet and RS-232C interface
- Full enclosure
- Leveling bolts and pads
- Manual pulse generator (MPG)
- Operation-safety door switches
- Operator manuals
- Programmable chip auger with lift-up exhaust tube and chip cart
- Programmable coolant wash down
- Programmable cutting air blow
- Spindle chiller
- Toolbox
- Wash down gun and air gun
- Work light
Optional Accessories
- 1 Gigabyte Data Server
- 4th axis rotary table
- BT 40 tool holder conversion
- Collant filtration
- Coolant through spindle (CTS)
- Lift up chip conveyor with cart
- Memory card editing
- Oil mist collector
- Oil mist device
- Oil skimmer
- Part probe measurement system
- Tool probe measurement system