
U600
Machine Information
Product Overview
5-Axis High-Speed Machining and Outstanding Surface Finish
High-Speed Machining and Outstanding
Surface Finish
- 25.98 x 40.16 x 19.69 in (660 x 1,020 x 500 mm) travels
- 23.62 in diameter (600 mm diameter) table working surface
with 1,102 lbs (500 kg) maximum capacity - 1,417 inches per minute (36 m/minute) rapids
- 787 in/minute (20 m/minute) cutting feed rates
- 50-station swing arm ATC
- One-piece casting absorbs the thrust forces of high rapids and
fast cutting feeds - One piece double-column design increases rigidity enabling
higher cutting feeds while maintaining part finish - Ladder design of cross rails increases rigidity and eliminates
head deflection - Over 35 components are hand scraped for fit
- Roller type linear rails support faster feed rates, higher rigidity,
and smoother linear motion due to larger contact area
compared to ball-type linear rails - Large diameter, preloaded and pretensioned ballscrews with
fine pitch for accurate motion control - 15,000 rpm Big Plus® CAT 40 inline spindle
- Heidenhain TNC 640 Control
- 2 year machine parts warranty
- 1 year control parts and labor warranty
- Factory direct service and 24/7 tech support
360 Walkaround
Take a virtual tour to have a better look inside and around the machine.
Technical Specifications
Weight | 30864.72 lbs |
---|---|
Dimensions | 151.77 × 128.15 × 138.58 in |
Travel |
|
X-Axis | 25.98 in (660 mm) |
Y-Axis | 40.16 in (1020 mm) |
Z-Axis | 19.69 in (500 mm) |
Table |
|
Distance from Spindle Nose to Table | 6.30 ~ 25.98 in (160 ~ 660 mm) |
Table Size | 23.62 in (600 mm) diameter |
Table Max. Load | 1102 lbs (500 kg) |
T-Slot Size | .55 x 3.94 x .20 in (14 x 100 x 5 mm) |
Spindle |
|
Spindle Speed | 15000 rpm |
Peak Spindle Torque | 65.9 ft lb (89.4 Nm) |
Spindle Taper | Big Plus® CAT 40 |
Coolant Thru Spindle | 30 bar / 435 psi |
Feed Rate |
|
Rapid Traverse (X/Y/Z) | 1417 x 1417 x 1417 ipm (36 x 36 x 36 m/min) |
Cutting Feed Rate | 787 ipm (20 m/min) |
ATC |
|
ATC Type | Swing Arm |
Magazine Capacity | 50 Tools |
Max. Tool Diameter | Next pocket empty 2.95 / 5.91 in (75 / 150 mm) |
Max. Tool Length | 11.81 in (300 mm) |
Max. Tool Weight | 17.64 lbs (8 kg) |
Tool Shank | CAT 40 (BT 40 Optional) |
Space & System Requirements |
|
Machine Net Weight | 30864.72 lbs (14000 kg) |
Electrical Power Consumption | 60 KVA |
Pneumatic Pressure | 85.34 psi (6 kgf/cm²) |
Operating Dimensions | 128.15 x 151.77 x 138.58 in (3255 x 3855 x 3520 mm) |
Information may change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions.
Standard Features & Options
Standard Features
- 15,000 rpm, 33.5 HP, Big Plus inline spindle
- 21 gigabyte SSDR for program storage
- 25 rpm 360° C-axis 800 mm table
- 3-light indicator lamp
- 33 rpm +30/-110° A-axis trunnion
- 40 tool swing arm ATC
- Coolant washdown system
- Hand-scraped contact areas
- Heidenhain TNC 640 control with 15.1” LCD display
- Leveling bolts and pads
- Oil skimmer
- Operator manuals
- Portable manual handwheel
- Programmable cutting air blow
- Roller-type linear guides on three axes
- Spindle chiller
- Steel belt, lift-up conveyor
- Wash down gun and air gun
- Work light
Optional Accessories
- 435 psi (30 bar), 8 gpm collant-thru spindle
- 50 tool swing arm ATC
- Blum automatic tool length measurement system
- Collant filtration
- Heidenhain TS 460 automatic workpiece measurement system
- Heidenhain TS 740 automatic workpiece measurement system
- Linear scales X, Y and Z axes
- Oil mist collector
- Oil mist device
- Spindle thermal compensation system